Ferrari's GTC4Lusso T, Arrives in the UAE

First four-seater Ferrari with a V8 engine is now at Al Tayer Motors, Dubai and Premier Motors, Abu Dhabi

Dubai, 23 May 2017:  Ferrari’s GTC4Lusso T, the first four-seater to sport a V8 engine, has arrived in UAE showrooms and can be viewed at Al Tayer Motors, Dubai and Premier Motors, Abu Dhabi.

Ushering in a whole new Ferrari GT concept, the car is aimed squarely at drivers looking for range as well as sporty driving and versatility.

“Ferraristi looking for a sporty and versatile vehicle that does not compromise on performance, while providing greater fuel efficiency, have the perfect solution in the form of the GTC4 Lusso T,” said Hossam Hosni, Vice President – Ferrari at Al Tayer Motors.

The GTC4Lusso T adopts an evolution of the 3.9-litre V8 turbo which punches out a maximum of 610 cv at 7,500 rpm, guaranteeing continuously powerful acceleration thanks to the fact that peak torque of 760 Nm is available between 3,000 and 5,250 rpm.

Like every engine to come out of Maranello, the GTC4Lusso T’s V8 turbo delivers the classic Ferrari power unit qualities: razor-sharp responsiveness, blistering performance, continuously powerful acceleration at all speeds, an exhilarating soundtrack, compact dimensions and a low-slung position to improve driving dynamics.

The GTC4Lusso T’s new power unit is the latest evolution of the V8 turbo engine that won overall “International Engine of the Year 2016”.

Combining this powertrain with rear-wheel drive has also guaranteed a significant weight-saving. The further adoption of 4WS (rear-wheel steering) delivers an extremely nimble, responsive drive. The rear-wheel steering system is integrated too with the latest evolution of the electronic controls of the SCM-E suspensions, ESP 9.0 and third generation Side Slip Control (SSC3).

The GTC4 Lusso T comes with the extended seven-year maintenance programme offered with all Ferrari cars.  This scheduled maintenance programme for the car is an exclusive service that assures clients the certainty that their car is being kept at peak performance and safety over the years. 

The Genuine Maintenance programme further broadens the range of after-sales services offered by Ferrari to satisfy clients wishing to preserve the performance and excellence that are the signatures of all cars built in Maranello, which itself has long been synonymous with leading-edge technology and sportiness. This very special service is also available to owners of pre-owned Ferraris through Al Tayer Motors and Premier Motors.

Technical Specifications

Engine 

• Type V8 - 90° Turbo 
• Overall displacement 3,855 cc 
• Bore and stroke 86.5 mm x 82 mm 
• Maximum power output** 449 kW (610 CV) at 7,500 rpm 
• Maximum torque 760 Nm at 3,000 -5,250 rpm 
• Max. revs 7,500 rpm 
• Compression ratio 9.4:1 

Weight and dimensions 

• Length 4,922 mm 
• Width 1,980 mm 
• Height 1,383 mm 
• Wheelbase 2,990 mm 
• Front track 1,674 mm 
• Rear track 1,668 mm 
• Kerb weight* 1,865 kg 
• Dry weight* 1,740 kg 
• Weight distribution 46% front - 54% rear 
• Boot capacity 450 l 
• Fuel tank capacity 91 l 

Tyres 

• Front 245/35 ZR20”; 8.5” J x 20” 
• Rear 295/35 ZR20”; 10.5” J x 20” 

Brakes 

• Front 398 mm x 38 mm 
• Rear 360 mm x 32 mm 
• Transmission and gearbox 4WS/ 7-speed F1 DCT/E-Diff 
• Electronic controls SSC3/CST with F1 TRAC system, ESP 9.0 
• Premium with ABS Evo/ SCM-E 

Performance 

• Maximum speed >320 km/h 
• 0-100 km/h 3.5 sec 
• 0-200 km/h 10.8 sec 
• 100-0 km/h 33 m 
• 200-0 km/h 137 m 
• Dry weight/power 2.85 kg/cv 
• Fuel consumption CO2 emissions 
• Fuel consumption*** 11.6 l/100 km 
• Emissions*** 265 gCO2/km 

*Power expressed in kW and cv for reasons of homogeneity. With 98 octane fuel 
**Equipped with specific optional extras 
*** Combined cycle with HELE system (ECE+EUDC)