Chronoswiss' Exclusive Limited Edition Flying Regulator Marks 31st Anniversary of Kitzbuhel Alpenrallye

Dubai, UAE, June 9, 2018:  To celebrate the 31st anniversary of the Kitzbuhel Alpenrallye, the most renowned event for classic cars in the Austrian Alps, Chronoswiss has issued an exclusive limited edition of the Flying Regulator Night and Day Kitzbuhel Edition, that is limited to just 13 timepieces worldwide.

 

The commemorative release of the Kitzbuhel Edition continues Chronoswiss' long association with traditional and mechanical watches and their emphasis on supporting traditional events such as the Kitzbühel Alpenrallye. Just like the Alpenrallye, the history of Chronoswiss goes back 30 years, with Chronoswiss being a prime sponsor and timing partner for the event over the last three years. 

 

Chronoswiss is one of the few brands that has traditionally used exclusively mechanical movements in its watches from the very beginning. Especially for the Alpenrallye, Chronoswiss has designed the Flying Regulator Night and Day Kitzbühel Edition, to the highest quality standards, making it a true collector's piece.

 

The Kitzbuhel Edition comes with a stainless steel case and a two-layered dial in vivid British racing green at the bottom, complete with a 3-D day/night display and skeletonized small seconds dial with crest of Kitzbüheler Alpenrallye. The dial's upper level is in galvanic black, featuring funnel-like constructions for the hours and seconds display. This exclusive timepiece also comes with a skeletonized, rhodium-plated rotor with ball bearing and Côtes de Genève; polished pallet lever, escape wheel and screws as well as bridges and plates with perlage. The elegant sporty look is completed by the hand-sewn leather rally strap set off with green stitching.

 

 

Model Flying Regulator Night and Day – Kitzbühel Edition 

Limited to 13 timepieces 

 

Reference CH-8763-GREBK Stainless steel, dial in British Racing Green 

Displays Off-centre hours at 12:00, central minutes, small seconds at 6:00, date window at 3:00, 3-D day/night display at 9:00 

Case Solid 16-piece, stainless steel case, with satin finish and polished, bezel with partial knurling and curved, non-reflecting sapphire crystal, screw-down case back with satin finish and sapphire crystal, onion crown, water resistance up to 10 bar, strap holders screwed down with patented Autobloc system 

Individual number of limitation engraved on side of case, at 9:00 

 

Measurements Ø 41 mm, height 13.85 mm 

Movement Chronoswiss caliber C. 296, automatic, with stop seconds 

Diameter Ø 26.20 mm / Ø 25.60 mm (11½´´´), impulse-angle 51° 

Height 4,35 mm 

Jewels 27 

Balance Glucydur, three-legged 

Balance spring Anachron 

Fine Adjustment Via Excenter 

Shock protection Incabloc 

Frequency 4 Hz., 28‘800 A/h (semi-oscillations) 

Power reserve Approx. 42 hours 

 

Special features Skeletonized and rhodium-plated rotor with ball bearing and Côtes de Genève; polished pallet lever, escape wheel and screws; bridges and plates with perlage 

 

Dial Elaborate construction on two levels: bottom level in British Racing Green with 3-D day/night display and skeletonized small seconds with crest of Kitzbüheler Alpenrallye; upper level in galvanic black, featuring funnel-like constructions for hours and seconds display 

 

Hands Feuille shape; rhodium-plated and polished; with Super-LumiNova inlays 

Feuille shape; curved, rhodium-plated and diamond cut 

Strap Rally-strap, leather with green stitchings, hand-sewn