Regulate your time!
Dubai, UAE, February 08, 2018: Anything but ordinary: a Regulator is not a watch like any other. This form of displaying the time has a tradition going back more than two centuries. It stands for what is special, unique and does not become immediately apparent to everyone. And this is more fundamental than ever: reading the dials with off-centre hour and second's hands takes a moment of focusing.
By consciously taking out this moment in today's fast-moving times, you take control of your own time again, which Chronoswiss fittingly words as 'Regulate your time' in its claim.
The Regulator Classic stands out by its classic and timeless appearance in combination with fresh and sporty emphases. Distinguished details such as the guilloched interior of the display for hours and seconds, the precisely aligned length of the hands and the thrilling contrast between matt-finished and polished surfaces create a harmonious overall appearance.
Not least with its carefully selected combinations of colours and materials Chronoswiss has created an unconventional automatic watch that masters the balancing act between watchmaker tradition and timeless design. The model with the 40 mm case made from stainless steel is available in three variants: in an entirely purist form with a dial in galvanic silver and thermally blued hands or, less conventional, in deep midnight blue, while the blue is echoed in both models by the interior of the calfskin strap.
The third variant is all classic and sporty: On the dial in galvanic black, signal red tones add that little dynamic extra that is emphasised by the casual rally design of the strap with red colour elements.
Technical Data –
Model Sirius Regulator Classic
References CH-8723-SI Stainless steel, dial galvanic silver
CH-8723-BL Stainless steel, dial galvanic blue
CH-8723-BK-RALLYE Stainless steel, dial galvanic black
Displays Regulator with central minutes and small seconds
Case Solid stainless steel case, satin finish and polished, bezel with partial knurling and non-reflecting sapphire crystal, screw-down case back with satin finish and sapphire crystal, onion crown, water resistance up to 3 bar, strap holders screwed down with patented Autobloc system
Dimensions Ø 40 mm, height 10.45 mm
Diameter Ø 30mm (approx. 13´´´)
Height 6.35 mm
Balance Glucydur, three-legged
Balance spring Anachron
Fine adjustment Via eccentric cam
Shock protection Incabloc
Frequency 4 Hz., 28,800 A/h (semi-oscillations)
Power reserve Approx. 38 hours
Finish Rhodium-plated and engraved rotor with Geneva Stripes, ball bearing mounted; circular-grained plate and bridges; polished lever, escape wheel and screws
Dial Matt centre, circular-grained rings, totalisers with guilloche, galvanised in various colours depending on design
Watch hands Feuille shape; curved, and thermally blued or rhodium-plated and diamond cut or lacquered
Strap Embossed calfskin, with blue or red leather lining and corresponding stitching, or perforated with red coating
Model Sirius Regulator Classic